High Performance Film Distribution, Fabrication and TEFLON® Coating

Sleeve Walls: 30 to 500 microns (0.0012 to 0.020 inches)

Features / Benefits

  • Excellent reliability and bondability on rubber and foam rollers
  • Extended wear life
  • Increased copier/printer speed
  • Improved image resolution
  • Improved paper handling
  • Excellent bondability to metal, rubber and foam substrates
  • Conformance to conventional and non-conventional shapes
  • Low stress/smooth surface sleeves available

FEP Roll CoversApplications

  • Pressure roll and fuser rolls
  • Medium and high volume printers and copiers
  • OEM, replacement and aftermarket applications

Microwall Shrink Sleeve

  • Under 0.010 inch wall, expanded
  • LIM Processable
  • Frequently used by OEM foam manufacturers and roller refurbishers
  • For use with various silicone rubbers and durometers

Microwall Sleeve

  • Under 0.010 inch wall, as extruded
  • Primarily designed and developed for OEM rollers
  • For use with a wide range of silicone rubbers and durometers

Heat Shrink Sleeve

  • Under 0.010 inch wall, expanded
  • Surface can be ground to specification
  • Often used in OEM high speed copier rollers or aftermarket applications
  • For use with various silicone and EPDM rollers
Sodium Ammonia Etch (Available for All Sleeves)
Wetting Index 70 dynes/cm
Microwall
Wall Thickness Range 0.0012 to 0.010 inches (30 to 250 µm)
Wall Tolerance Range ± 0.0003 to 0.0015 inches (7.7 to 38 µm)
Length Tolerance ± 0.080 inches (2.0 mm)
ID Range 0.47 to 4.0 inches (12.0 to101.6 mm)
ID Tolerance ± 0.010 inches (0.2 mm)
Tensile Strength (@ break) 73°F (23C) 2850 psi (2 kg/sq. mm)
Elongation 200%
Microwall Shrink Sleeve
Wall Thickness Range .003 to 0.010 inches (75 to 250 µm)
Wall Tolerance Range ± 0.0003 to 0.0015 inches (7.7 to 38 µm)
ID Range 0.47 to 4.0 inches (12.0 to 101.6 mm)
Tensile Strength (@break) 73°F (23C) 2850 psi (2 kg/sq. mm)
Elongation 200%
Heat Shrink Sleeves
Wall Thickness Range 0.012 to 0.020 inches (300 to 500 µm)/td>
Wall Tolerance Range +/- 0.0015 to 0.003 inches (38 to 76 µm)
ID Range 1.0 to 4.0 inches (25.4 to 101.6 mm
Tensile Strength (@break) 73°F (23C) 2850psi (2 kg/sq. mm)
Elongation 200%