High Performance Film Distribution, Fabrication and TEFLON® Coating
Non Stick TEFLON Coating Non-Stick
Very few solid substances will permanently adhere to a "TEFLON®" coating. And while tacky materials may show some adhesion, almost all substances release easily.
Heat-Resistance Fluoropolymer Coatings

Heat-Resistance
There is no decomposition of TFE finishes below 400 F; insignificant decomposition between 400 F and 500 F, which requires no special precautions. Between 500 F, and 575 F, intermittent service is possible with adequate ventilation.
Cryogenic Stability TEFLON Coating

Cryogenic Stability
Many "TEFLON®" coatings will withstand severe temperature extremes without loss of physical properties. "TEFLON®" may be considered for use at temperatures as low as - 450 F.
Chemical Resistance TEFLON Co Chemical Resistance
"TEFLON®" is normally unaffected by chemical environments. However, certain coatings are permeable or have a lower resistance to attack. The only chemicals known to affect all "TEFLON®" finishes are the alkali metals and highly reactive fluorinating agents.
Hydrophobic TEFLON Co

Non-Wetting
Since "TEFLON®" surfaces are both oleophobic and hydrophobic, they are not readily wet. Clean-up is easier, more thorough and in many cases self-cleaning.
Low Friction TEFLON Co

Low Coefficient of Friction
The coefficient of friction of "TEFLON®" is generally in the range of 0.05 to 0.20, depending on the load, sliding speed and particular "TEFLON®" finish used.
TEFLON Dielectric Strength

Unique Electrical Properties
Over a wide range of frequencies, "TEFLON®" has high dielectric strength, a low dissipation factor, and very high surface resistivity.

Click here to view technical data on KYNAR® 2850 PC PVDF Powder Coating

Click here to view technical data on HALAR® 6014 Powder Coating

Click here to view technical data on VICOTE® Dispersion and Powder

COATING MATERIAL CHIEF USES OPERATING TEMP. MAX NORMAL COATING THICKNESS COATING TOLERANCES
TEFLON® (TFE)* Anti-Stick 600°F 1 mil (.001") (.5 mil/coat) ± .0005"
TEFLON®* (FEP) Release Insulation Anti-Corrosion Anti-Icing 425°F 3.4 mils (.3 mil/coat) ± .0005"
TEFLON®* (PFA) Low Friction Insulation, Anti-Corrosion Chem-Resistant 500°F 4.6mils (1.5 mil/coat) ± .0005"
Conductive TEFLON® (TFE)* TEFLON® To Help Drain Static Charge 600°F 1 mil (.001") (.5 mil/coat) ± .0005"
TEFLON®-S* #400 Low Friction, Anti-Stick 325°F 2 mil (1 mil/coat) ± .0005"
TEFLON®-S* #550 Hard TEFLON® For Abrasion Resistance 450°F 1.5 mils (.7 mil/coat) ±.0005"
Durafilm TEFLON®* Durable Wear Resistance Release 425°F 1 mil (.5 mil/coat) ±.0002"
TEFLON® (UF)* Rubber "O" Ring Lubrication As Allowed By Rubber .3 mil (1 coat) ±.002"
TEFLON®* SFDA Food Contact Cookware Covers 425°F 1.5 mils (.7 mils/coat) ±.0005"
Durafilm Fluoro-Carbon "A" Low Temp Cure 450°F 1.5 mil (.7 mil/coat) ±.0005"
DYKOR* Anti-Corrosion, Chem Resistant 450°F 12-15 mils (3 mils/coat) ±.001"
VICTREX®* PEEK™* Superior Combination, Lubrication & Abrasion 600°F 1-20 mils ±.001"

 

COATING MATERIAL NORMAL DIELECTRIC STRENGTH BAKING TEMP OTHER USEFUL CHARACTERISTICS COLORS TYPE
TEFLON® (TFE)* 450 v/mil 750°F Lubricity Inertness Various Colors Sintered
TEFLON®* (FEP) 1000 v/mil 700°F Low Temp Operation -325°F, FDA/Chem Resistant Green, Gray Thermo-Plastic
TEFLON®* (PFA) 2000 v/mil 700°F Curable and Abrasion Resistant Green, Black Thermo-Plastic
Conductive TEFLON® (TFE)* Conductor 750°F Conductor Black —
TEFLON®-S* #400 1500 v/mil 450°F Ice Release, Ice Temp Cure Green, Black Thermo-Set
TEFLON®-S* #550 1500 v/mil 650°F For Difficult Potting Molds, Saw Blades Black Thermo-Set
Durafilm TEFLON®* 1000 v/mil 700°F For Difficult Epoxy Or Urethane Molding Green, Black Thermo-Plastic
TEFLON® (UF)* — As Allowed By Number Insulation On Ferrite Cores Green Thermo-Set
TEFLON®* SFDA 1500 v/mil 650°F Processing, Equipment, Wear Resistant Black Thermo-Set
Durafilm Fluoro-Carbon "A" — 300°F 1hr
400°F 1/2hr		 — Black Thermo-Set
DYKOR* 1280 v/mil 500°F Durable And Abrasion Resistant Yellow, Blue, Golden Brown Thermo-Plastic
VICTREX®* PEEK™* 1000 v/mil 750°F Additives To Maximize Desirable Properties Any Color Thermo-Set
TEFLON® Click here to view our DuPont Technical Specifications
TEFLON® is a registered trademark of DuPont Co.

* Reg. U.S. Pat. Off. for DuPont's non-stick finishes